sa6anw/mestre
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

first commit

Browse Source
This commit is contained in:
Joakim
2026-05-02 22:12:59 +02:00
commit 0348a3fb57
18 changed files with 2512 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

561
br2_external/board/x6200/dts/sun8i-r16-x6200.dts Normal file
View File

@@ -0,0 +1,561 @@
/dts-v1/;
/*
* Decompiled, and cleaned up device tree file for the X6200.
* Thanks <apritzel> from #linux-sunxi @ OFTC (https://oftc.net/)
*/
#include "sun8i-a33.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "XIEGU Tech X6200 Transceiver";
compatible = "xiegu,x6200", "allwinner,sun8i-r16";
aliases {
serial0 = "/soc/serial@1c28000";
mmc0 = &mmc0;
mmc2 = &mmc2;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mali_cma: cma@4a000000 {
compatible = "shared-dma-pool";
size = <0x8000000>;
alloc-ranges = <0x4a000000 0x8000000>;
reusable;
linux,cma-default;
};
};
mmc1_pwrseq: mmc1-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 0 GPIO_ACTIVE_LOW>; /* PC0 (?) */
};
mmc2_pwrseq: mmc2-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 2 0x10 GPIO_ACTIVE_LOW>;
};
reg_usb0_vbus: usb0_vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
status = "okay";
};
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
enable-active-high;
gpio = <&r_pio 0 4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_vcc5v0: vcc5v0 {
compatible = "regulator-fixed";
regulator-name = "vcc5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
backlight: backlight {
compatible = "pwm-backlight";
power-supply = <&reg_vcc5v0>;
// perhaps - replace with original 50000
pwms = <&pwm 0 10000000 0>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <5>;
enable-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
};
spi {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
sck-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
mosi-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
cs-gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
num-chipselects = <1>;
status = "okay";
panel@0 {
compatible = "jinglitai,jlt4013a";
reg = <0>;
power-supply = <&reg_vcc3v3>;
reset-gpios = <&r_pio 0 11 GPIO_ACTIVE_LOW>; /* PL11 */
dcx-gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
backlight = <&backlight>;
spi-max-frequency = <100000>;
port {
panel_input: endpoint {
remote-endpoint = <&tcon0_out_panel>;
};
};
};
};
matrix_keypad {
compatible = "gpio-matrix-keypad";
row-gpios = <&pio 6 10 0x17>, <&pio 6 7 0x17>, /* PG6-PG10 */
<&pio 6 6 0x17>, <&pio 6 8 0x17>,
<&pio 6 9 0x17>;
col-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>, /* PE11-PE17 */
<&pio 4 17 GPIO_ACTIVE_LOW>,
<&pio 4 11 GPIO_ACTIVE_LOW>,
<&pio 4 14 GPIO_ACTIVE_LOW>,
<&pio 4 12 GPIO_ACTIVE_LOW>,
<&pio 4 13 GPIO_ACTIVE_LOW>;
linux,keymap = <MATRIX_KEY(0, 0, BTN_TRIGGER_HAPPY1)
MATRIX_KEY(0, 1, BTN_TRIGGER_HAPPY2)
MATRIX_KEY(0, 2, BTN_TRIGGER_HAPPY3)
MATRIX_KEY(0, 3, BTN_TRIGGER_HAPPY4)
MATRIX_KEY(0, 4, BTN_TRIGGER_HAPPY5)
MATRIX_KEY(0, 5, BTN_TRIGGER_HAPPY6)
MATRIX_KEY(1, 0, BTN_TRIGGER_HAPPY7)
MATRIX_KEY(1, 1, BTN_TRIGGER_HAPPY8)
MATRIX_KEY(1, 2, BTN_TRIGGER_HAPPY9)
MATRIX_KEY(1, 3, BTN_TRIGGER_HAPPY10)
MATRIX_KEY(1, 4, BTN_TRIGGER_HAPPY11)
MATRIX_KEY(1, 5, BTN_TRIGGER_HAPPY12)
MATRIX_KEY(2, 0, BTN_TRIGGER_HAPPY13)
MATRIX_KEY(2, 1, BTN_TRIGGER_HAPPY14)
MATRIX_KEY(2, 2, BTN_TRIGGER_HAPPY15)
MATRIX_KEY(2, 3, BTN_TRIGGER_HAPPY16)
MATRIX_KEY(2, 4, BTN_TRIGGER_HAPPY17)
MATRIX_KEY(2, 5, BTN_TRIGGER_HAPPY18)
MATRIX_KEY(3, 0, BTN_TRIGGER_HAPPY19)
MATRIX_KEY(3, 1, BTN_TRIGGER_HAPPY20)
MATRIX_KEY(3, 2, BTN_TRIGGER_HAPPY21)
MATRIX_KEY(3, 3, BTN_TRIGGER_HAPPY22)
MATRIX_KEY(3, 4, BTN_TRIGGER_HAPPY23)
MATRIX_KEY(3, 5, BTN_TRIGGER_HAPPY24)
MATRIX_KEY(4, 0, BTN_TRIGGER_HAPPY25)
MATRIX_KEY(4, 1, BTN_TRIGGER_HAPPY26)
MATRIX_KEY(4, 2, BTN_TRIGGER_HAPPY27)
MATRIX_KEY(4, 3, BTN_TRIGGER_HAPPY28)
MATRIX_KEY(4, 4, BTN_TRIGGER_HAPPY29)
MATRIX_KEY(4, 5, BTN_TRIGGER_HAPPY30)>;
gpio-activelow;
wakeup-source;
linux,no-autorepeat;
debounce-delay-ms = <25>;
col-scan-delay-us = <1>;
drive-inactive-cols;
};
rotary0 {
// Main
compatible = "rotary-encoder";
gpios = <&pio 1 2 GPIO_ACTIVE_LOW>, /* PB2 */
<&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
linux,axis = <0>;
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
pinctrl-names = "default";
pinctrl-0 = <&rotary_1_pins>;
};
rotary1 {
// VOL
compatible = "rotary-encoder";
gpios = <&pio 1 6 GPIO_ACTIVE_LOW>, <&pio 1 4 GPIO_ACTIVE_LOW>;
linux,axis = <1>;
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
pinctrl-names = "default";
pinctrl-0 = <&rotary_2_pins>;
};
rotary2 {
// MFK outer
compatible = "rotary-encoder";
gpios = <&pio 1 5 GPIO_ACTIVE_LOW>, <&pio 1 7 GPIO_ACTIVE_LOW>;
linux,axis = <2>;
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
rotary-encoder,steps-per-period = <2>;
pinctrl-names = "default";
pinctrl-0 = <&rotary_3_pins>;
};
rotary3 {
// MFK inner
compatible = "rotary-encoder";
gpios = <&pio 6 0 GPIO_ACTIVE_LOW>, <&pio 6 1 GPIO_ACTIVE_LOW>;
linux,axis = <3>;
rotary-encoder,encoding = "gray";
rotary-encoder,relative-axis;
rotary-encoder,steps-per-period = <2>;
pinctrl-names = "default";
pinctrl-0 = <&rotary_4_pins>;
};
};
&de {
status = "okay";
};
&codec {
status = "okay";
};
&dai {
status = "okay";
};
&ehci0 {
status = "okay";
};
&i2c0 {
status = "okay";
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x1c2ac00 0x400>;
interrupts = <GIC_SPI 0x06 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
// clock-frequency = <100000>;
resets = <&ccu RST_BUS_I2C0>;
};
&i2c0_pins {
function = "i2c0";
};
&i2c1 {
status = "okay";
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x1c2b000 0x400>;
interrupts = <GIC_SPI 0x07 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
// clock-frequency = <100000>;
resets = <&ccu RST_BUS_I2C1>;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
interrupt-parent = <&pio>;
interrupts = <6 13 IRQ_TYPE_EDGE_FALLING>; /* PG13 */
interrupt-names = "irq";
irq-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>;
};
};
&i2c1_pins {
function = "i2c1";
};
&mmc0 {
status = "okay";
vmmc-supply = <&reg_dcdc1>;
cd-gpios = <&pio 4 3 GPIO_ACTIVE_LOW>; /* PE3 */
bus-width = <4>;
};
&mmc1 {
status = "disabled";
};
&mmc2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_dcdc1>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
};
&ohci0 {
status = "okay";
};
&pio {
vcc-pb-supply = <&reg_vcc3v3>;
vcc-pc-supply = <&reg_vcc3v3>;
vcc-pd-supply = <&reg_vcc3v3>;
vcc-pe-supply = <&reg_vcc3v3>;
vcc-pf-supply = <&reg_vcc3v3>;
vcc-pg-supply = <&reg_vcc3v3>;
vcc-ph-supply = <&reg_vcc3v3>;
vcc-pl-supply = <&reg_vcc3v3>;
uart3_pins: uart3-pins {
pins = "PH6", "PH7";
function = "uart3";
};
usb0_id_detect_pin0: usb0_id_detect_pin@0 {
pins = "PH8";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin0: usb0_vbus_detect_pin@0 {
pins = "PH9";
function = "gpio_in";
bias-pull-down;
};
rotary_1_pins: rotary-1-pins {
pins = "PB2", "PB3";
function = "gpio_in";
bias-pull-up;
};
rotary_2_pins: rotary-2-pins {
pins = "PB4", "PB6";
function = "gpio_in";
bias-pull-up;
};
rotary_3_pins: rotary-3-pins {
pins = "PB5", "PB7";
function = "gpio_in";
bias-pull-up;
};
rotary_4_pins: rotary-4-pins {
pins = "PG0", "PG1";
function = "gpio_in";
bias-pull-up;
};
};
&pwm {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
};
&r_rsb {
status = "okay";
axp22x: pmic@3a3 {
compatible = "x-powers,axp223";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
#include "axp223.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_dcdc1 {
regulator-name = "vcc-3v0";
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_dcdc2 {
regulator-name = "vdd-sys";
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
};
&reg_dcdc3 {
regulator-name = "vdd-cpu";
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
};
&reg_dcdc4 {
regulator-name = "vdd-gpu";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
};
&reg_dcdc5 {
regulator-name = "vcc-dram";
regulator-always-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
};
&reg_dc1sw {
regulator-name = "vcc-lcd";
regulator-always-on;
};
&reg_dc5ldo {
regulator-name = "vdd-cpus";
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
};
&reg_aldo1 {
regulator-name = "vcc-io";
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_aldo2 {
regulator-name = "vdd-dll";
regulator-always-on;
regulator-min-microvolt = <2350000>;
regulator-max-microvolt = <2650000>;
};
&reg_aldo3 {
regulator-name = "vcc-pll-avcc";
regulator-always-on;
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
};
&reg_dldo1 {
regulator-name = "vcc-wifi0";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
&reg_dldo2 {
regulator-name = "vcc-wifi1";
regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
&reg_dldo3 {
regulator-name = "vcc-3v0-csi";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_eldo1 {
regulator-name = "vcc-1v2-hsic";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
&reg_eldo2 {
regulator-name = "vcc-dsp";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_eldo3 {
regulator-name = "eldo3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&reg_rtc_ldo {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "rtc_ldo";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&r_uart {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&r_uart_pins_a>;
};
&sound {
simple-audio-card,routing = "Left DAC", "AIF1 Slot 0 Left",
"Right DAC", "AIF1 Slot 0 Right",
"AIF1 Slot 0 Left ADC", "Left ADC",
"AIF1 Slot 0 Right ADC", "Right ADC";
status = "okay";
};
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_rgb666_pins>;
status = "okay";
};
&tcon0_out {
tcon0_out_panel: endpoint@0 {
reg = <0>;
remote-endpoint = <&panel_input>;
};
};
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&usb_otg {
dr_mode = "host";
status = "okay";
};
&usbphy {
status = "okay";
usb0_id_det-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin0>;
};
&usb_power_supply {
status = "okay";
};
&dphy {
status = "okay";
};